Table of Contents
Advertisement
BioAxs 9800IR™ Installation & Operations Manual. Version 1.9
unlock the door or communicate the verification state to a third party access controller (if
applicable).
If the verified member pressed the '#' key when instructed, the text display will update to read:
'Enter the number of guests followed by #'.
Once the number of guests has been entered using the keypad device on the panel, the panel
will proceed to unlock the door or communicate the verification state to a third party access
controller (if applicable). The tailgating countermeasure input will be examined for this access
control event and be communicated to the Command Center system.
Access Panel Modes of Operation
One of the features of the BioAxs 9800IR™ Access Panel is an ability to dynamically alter its
operating behavior or configuration based on settings applied from the Command Center Access
Control System software.
When you received your BioAxs 9800IR™, it was preconfigured for one of the following
behaviors:
Code
Description
IH
PIN plus Iris OR Fingerprint Verification
II
PIN plus Iris OR Fingerprint Verification with Tailgating
JE
Wiegand plus Iris OR Fingerprint Verification
JF
Wiegand plus Iris OR Fingerprint Verification with Tailgating
KE
CAC plus Iris OR Fingerprint Verification
KF
CAC plus Iris OR Fingerprint Verification with Tailgating
Each of the above entries is commonly referred to as the 'base' or 'default' configuration for the
access panel. They are individually responsible for the various operating configurations that will
be available for your access panel.
IH: PIN plus Iris or Fingerprint
The default behavior of this configuration will be to identify the member using a unique Personal
Identification Number (PIN) and then verify that member's identity using an iris or fingerprint
biometric. This panel may be 'scaled down' to operate in any of the following modes:
Code
Description
IC
PIN plus Iris Verification
IE
PIN plus Iris AND Fingerprint Recognition
II: PIN plus Iris or Fingerprint with Tailgating Countermeasure
The default behavior of this configuration will be to identify the member using a unique Personal
Identification Number (PIN) and then verify that member's identity using an iris or fingerprint
biometric. The tailgating countermeasure device will record its input for all appropriate events
generated during the use of this panel. This panel may be 'scaled down' to operate in any of the
following modes:
Code
Description
ID
PIN plus Iris Verification with Tailgating
IG
PIN plus Iris AND Fingerprint Recognition with Tailgating
Copyright © 2004 NextgenID, Ltd. All Rights Reserved
45
Advertisement
Table of Contents
