Pre-Recording; Sampling Rate - Roland R-88 Owner's Manual

Recording/Playback
5.
Touch the letter keys to enter characters .
Each time you touch a letter key, the character will change in the
order of A, B, and C. Touch <Type> to switch between uppercase,
lowercase, and numerals.
Touch <Del> to delete the character at the cursor location.
To confirm the edited name, touch <OK>.
If you decide to cancel, touch <CANCEL>.
MEMO
• On the R-88, you can only rename file names that consist of
ASCII characters (single-byte alphanumeric characters).
• You cannot rename a file name that contains double-byte
characters such as Japanese.
• You won't be able to delete all the characters. There will always
be one remaining character.
Characters that can be used
(space) ! # $ % & ' ( ) + , - . 0 1 2 3 4 5 6 7 8 9 ; = @
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ] ^ _ `
a b c d e f g h i j k l m n o p q r s t u v w x y z { }
36

Pre-Recording

The R-88 provides a pre-recording function that can retroactively
make the recording start up to five seconds prior to the moment
you press the record button.
Even for situations in which you're not sure when the desired sound
will begin, such as when recording outdoors, this function ensures
that you can record without missing the first moments of the
sound.
1.
Choose [MENU] <REC/PLAY SETUP>
Ú
2.
Choose the number of seconds that will be captured prior
to the moment you press the record button .

Sampling Rate

Choose the sampling rate that's appropriate for the intended
purpose of the recorded data.
1.
Choose [MENU] <REC/PLAY SETUP>
Ú
<SAMPLE RATE> is located on page 2/3. Touch
<PRE REC> .
Ú
<SAMPLE RATE> .
Ú
to access 2/3.