Formatting An Sd Card; Removing An Sd Card - Roland R-88 Owner's Manual

Formatting an SD Card

If the SD card is being used for the first time, you must format the
card before it can be used.
NOTE
• When you format an SD card, all data on the card will be erased.
If the card contains important data, back it up to your computer
first.
• You must format the SD card on the R-88 itself. An SD card
formatted on a device other than the R-88 might not work
correctly in the R-88.
1.
Make sure that the SD card you want to format is inserted
in the SD card slot .
2.
Choose [MENU] <MEMORY> .
Ú
3.
Touch <SD CARD FORMAT> .
4.
To format the card, touch <YES> .
About SD cards
• The R-88 supports SDHC cards.
• Never insert or remove an SD card/SDHC card while this unit's power is on. Doing so may corrupt the unit's data or the data on the SD card/
SDHC card.
• Some memory card types or memory cards from some manufacturers may not record or play back properly on the R-88.
• Carefully insert the SD card/SDHC card all the way in—until it is firmly in place.
The SD card write protect feature (LOCK)
The contents of the SD card/SDHC card can be protected by write protecting it. To write protect a card, slide the write
protect switch on the side of the SD card/SDHC card to the "LOCK" position. Unlock write protect to delete data on the
card.
The card will be formatted.
When formatting has been completed, the following screen will
appear.
5.
Press the [MENU] (HOME) button to return to the home
screen .
You can also return to the home screen by touching
of times.

Removing an SD Card

1.
Switch off the R-88's power (p . 25) .
2.
Open the Rubber flap .
3.
Gently press the SD card inward, and then release your
finger .
When the SD card pops out, remove it.
NOTE
Do not insert or remove an SD card while the power is on. The data
on the SD card may be lost if you do so.
Setup
a number
Write protect switch
27