VDO DTCO 1381 Operating Instructions Company & Driver page 74

Overview of the operational notes
Picto / reason Meaning
Requesting the tachograph card will be rejected:
 ejection not
possible
There is an inconsistency in the order of the dates in the data
?1 recording
recorded on the driver card.
inconsistent
An error has occurred when processing the inserted tachograph
1 card error
card. The tachograph card is not accepted and is ejected.
7
The inserted card is not a tachograph card. The card is not
1 wrong card
accepted and is ejected.
type
Fault in the card mechanics, e.g. card lock is not closed.
1 internal
fault
 internal
fault
74
because data might be read in or transferred,
the driver card needs to be read-in again within the registra-
tion time of one minute,
a day change (according to UTC time) is taking place,
the vehicle is moving,
or, in the ADR variant *, the ignition has been switched off.
Fault at pulse output.
Measure
Wait until the DTCO 1381 enables the func-
tion or remove the problem: Stop the vehicle
or switch on the ignition.
Then request the tachograph card again.
This message can be displayed until the
incorrect recordings have been overwritten
by new data!
Have the tachograph card checked if the
message is displayed permanently.
Clean the contacts of the tachograph card
and insert it again.
If this message is displayed again, check
whether another tachograph card can be
read in correctly.
Please insert a valid tachograph card.
Remove tachograph card and insert it again.
Check connecting cables or function of the
connected control device.
7. Messages

DTCO 1381