VDO DTCO 1381 Operating Instructions Company & Driver page 103

9. Pictograms and printout samples
Entries during instances of over-
20c
speeding (chronologically
arranged by highest average
speed):
Date, time, and duration of
over-speeding
Highest and average speed of
the over-speeding instance,
number of similar events on
this day
Last name of driver
20c
First name of driver
Card identification of the
driver
Note: If no data record for an instance
of over-speeding appears in a block,
then the following appears: "
Handwritten information:
21
= Location of control

= Signature of the

controller
= Start time

= End time

= Signature of the driver

© Continental Automotive GmbH
Information about the cardholder
22
of the recorded profile:
Last name of driver
First name of driver
Card identification
Note: Missing information about the
cardholder means: no driver card
inserted in card slot 1.
Beginning of the profile
recording with date and time
End of the profile recording
with date and time
New profiles are created:
by inserting / withdrawing a
tachograph card into / from
card slot 1
".
---
by a day change
by a correction of the UTC
time
by a voltage interruption
Explanations of printout examples
Recording of speed profiles:
23
List of the defined speed rang-
es and period in this range
Range: 0 <=v< 1 =
Vehicle stationary
The speed profile is divided into
16 zones. During installation, the
individual ranges can be adjusted
individually.
Recording of rpm profiles:
24
List of the defined motor rpm
ranges and period in this range
Range: 0 <=n< 1 =
Engine off
Range: 3281 <=n< x =
unlimited
The rpm profile is divided into
16 zones. During installation, the
individual ranges can be adjusted
individually.
Manufacturer-specific data:
25
Version number of the soft-
ware upgrade module
(SWUM)
9

103