Security Tronix HD-COAXINATOR ST-HD-IRPTZ-2MP Installation Manual page 5

Making Connections
1. Connect the AC power supply cable to the camera's power
leads.
2. Connect the camera to the CVR with a 75Ω coaxial video
cable.
3. (Optional) Connect unshielded twisted pair (UTP) control
cable between the camera's labeled RS485 leads and the PTZ
controller. Be sure wire polarities (+/-) are the same at each
connection.
4. Connect power supply's AC plug to a suitable AC power
outlet.
Operation
Default Address:
Default Baud Rate:
Setting Address
On your PTZ controller, CALL preset 95 to enter the OSD MENU. The
symbol will indicate your current selection. Using the joystick or
up/down arrows, navigate to SYSTEM SETTING and press OPEN to
enter.
1
9600
4