One installation manual. PRODUCT DESCRIPTION The ST-PTZIR480-30X is a professional grade infrared intelligent dome color camera with pan, tilt and zoom (PTZ) capability and 480TVL resolution. The camera’s non-volatile digital memory allows the saving of all settings. Its 200 preset positions provide versatility for cruise routes and tour functions. The ST-PTZIR480-30X’s mechanical design permits continuous horizontal 360...
INSTALLATION AND OPERATION This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock.
b. Feed the cable assembly up through the smaller end of the mount and out the rear opening. c. Assemble the camera dome to the mounting arm using the 4 supplied allen-head cap screws and allen wrench. 2. MECHANICAL INSPECTION Inspect the entire camera for shipping damage.
5. WIRING CONNECTIONS 6. FUNCTIONS and OPERATION Menu Operation Several functions can be accessed directly without using the camera’s on screen menu display. Note the following dedicated preset functions: Special Use Preset Numbers Call PRESET 95 ―― Enter into main OSD menu Call PRESET 96 ――...
Page 11
Menu Guide SYSTEM SETTING →DOME ID TITLE LANGUAGE SELECT CHANGE PASSWORD FACTORY DEFAULT SYSTEM RESTART SYSTEM INFOMATION MAIN MENU 【SYSTEM SETTING】 【CAMERA PARAMETERS】 CAMERA PARAMETERS 【PAN TILT SETTING】 →【LENS PARAMETER】 【DISPLAY CONFIGURATION】 【EXPOSURE MODE】 【WHITE BALANCE】 【ALARMS SETUP】 【BACKLIGHT MODE】 PANTILT SETTING →...
Main Menu Function Setting Main menu 【SYSTEM SETTING】 【CAMERA PARAMETERS】 【PAN TILT SETTING】 【DISPLAY CONFIGURATION】 【ALARMS SETUP】 System Setting MAIN MENU SYSTEM SETTING →DOME ID 【SYSTEM SETTING】 TITLE 【CAMERA PARAMETERS】 LANGUAGE SELECT: ENGLISH 【PAN TILT SETTING】 CHANGE PASSWORD 【DISPLAY CONFIGURATION】 FACTORY DEFAULT 【ALARMS SETUP】...
Page 13
Notes: 20 characters can be set. Characters include: 0-9、A-Z、 :<>-. Other text-entry menus follow this same procedure. LANGUAGE SELECT Procedure: Call preset 95 to enter the main menu. Use the up/down PTZ controls to choose [SYSTEM SETTING] and press [OPEN] to confirm the selection.
Page 14
selection. The dome’s present system information will be shown on the screen。 CAMERA PARAMETERS MAIN MENU CAMERA PARAMETERS 【SYSTEM SETTING】 →【LENS PARAMETER】 【CAMERA PARAMETERS】 【EXPOSURE MODE】 【PAN TILT SETTING】 【WHITE BALANCE】 【BACKLIGHT MODE】 【DISPLAY] [CONFIGURATION】 【ALARMS SETUP】 LENS PARAMETER Use this menu to set the camera's zoom speed, electronic zoom, and focus and preset points limit.
Use the up/down PTZ controls to choose [CAMERA PARAMETERS] and press [OPEN] to confirm the selection, then enter [LENS PARAMETER] menu. Under [LENS PARAMETER] choose [FOCUS LIMIT] and press [OPEN] to confirm the selection and enter focus limit set. The setting will blink. Use up/Down P/T to change the setting.
Page 16
This is set individually. There are 16 settings from -3dB through 28dB. DIGI-SLOW SHUTTER: This can be turned either on or off. Turning this ON allows the camera to increase gain by slowing down the shutter digitally. DAY/NIGHT MODE: This can be set to either DAY, NIGHT or AUTO.
Use this setting to help compensate for lighting conditions where there is a strong light visible behind the object you are trying to observe with the camera. CAMERA PARAMETERS BACKLIGHT MODE 【LENS PARAMETER】 →BACK LIGHT MODE : ON 【EXPOSURE MODE】 【WHITE BALANCE】...
Page 18
and enter auto flip set. Use Up/down P/T to select and change this function to ON or OFF. Press the [OPEN] key to save and exit. Press the [CLOSE] key to exit directly without saving. JOYSTICK RECOVER NOTE: This model of camera does not support manual focus or iris adjustments. The settings may be made for joystick recover, but they will have no effect as there is no manual iris or focus settings to recover from.
INFRARED ARRAY The IR LEDs can be set to switch from low power to high power when the zoom lens is zoomed to a certain amount. For example, setting this to “3X” will change the LEDs to the higher power setting when the lens is zoomed to 3X optical magnification or more.
This camera supports 200 preset points. Preset Number Setting Procedure: 1. Call preset point 95 to enter the main menu. 2. Use Up/Down P/T to choose [PANTILT SETTING] and press [OPEN] to confirm the selection and enter preset set menu. 3.
SEQUENCE NUMBER Procedure: Call preset point 95 to enter the main menu. Use the Up/Down cursor to choose [PANTILT SETTING], press [OPEN] to confirm the selection and enter sequence set menu. Under [PANTILT SETTING] choose [SEQUENCE SETUP] and press [OPEN] to confirm the selection.
Use the Up/Down cursor to choose [PANTILT SETTING] and press [OPEN] to confirm the selection and enter pan set menu. Under [PANTILT SETTING] choose [PATTERN SETUP] and press [OPEN] to enter route recording mode. Under [PATTERN SETUP] choose [RECORD NEW PATTERN] and press [OPEN] to enter mode route recording setting.
Page 23
DEFAULT SPEED Adjusts the L/R scan speed. The speed range is adjustable from 1 to 64. Procedure: Call preset point 95 to enter the main menu. Move cursor to choose [PANTILT SETTING] choose [AUTOSCAN SETUP] and press [OPEN] to confirm the selection to enter scan function set item. Under [AUTOSCAN SETUP] choose [DEFAULT SPEED] item and press [OPEN] to confirm the selection to enter default scan speed set item.
200 presets, 4 sequences, 4 scans or 4 patterns. 10. Press the [OPEN] key to save and exit. Press the [CLOSE] key to exit directly without saving. INFORMATION DISPLAY CONFIGURATION This menu sets whether or not various information is displayed within the camera’s video output and if so, the time duration of the display.
The camera supports 2 alarm inputs and 2 alarm outputs. When an alarm input is triggered, the following actions can be executed: An alarm input trigger can cause the dome to immediately go to any preset for surveillance. Either alarm output channel relay can activate external alarm equipment.
ALARM LINKAGE This function is used to select which action is taken by the camera when an alarm input is triggered. E.g., Auto Scan 1 thru 4,Preset Point 1 thru 200, Sequence 1 thru 4 etc. Procedure: Call preset point 95 to enter the main menu. Use the Up/Down cursor to choose [ALARMS SETUP] and press [OPEN] to confirm the selection and enter Alarms Setup.
TROUBLESHOOTING a. No picture after applying power – (i) check all plugs and cables are connected to the proper connectors: (ii) ensure your power supply is providing the correct voltage and enough current. b. The picture has ripples – (i) Check to see if the power supply is experiencing AC ripple. If so, a filter may be required.