Table of Contents
Advertisement
TV+
"Bitrate":
-
500kb/s
quality. The higher the encoding rate, the higher the image quality but also more hard drive
space will be used.
"Sampling":
-
32kHz
quality sound but will take up more space on the hard drive.
"Contrast":
adjusts the recorded image contrast.
-
"Brightness" *:
adjusts the recorded image brightness.
-
"Saturation" *:
use this to de-emphasize or saturate the colors in the recorded image.
-
"Hue" *:
changes the color spectrum in the recorded image.
-
"RGB settings" *:
-
(only when the source outputs an RGB signal).
"Blue saturation" *:
-
signal).
"Red saturation" *:
-
"Reset":
changes the above settings to the default values.
-
* These parameters will vary according to which type of signals are present on
+
the TV
inputs.
COPY PROTECTION
•
The ARCHOS recording system is designed to respect the Macrovision™ copyright
protection system. If the source of your video is copy-protected, the device will
record in protected mode. You will see a 'P' icon on the recording screen (not dur-
•
HDCP video output (in this case, your TV must have an HDMI/HDCP input con-
nector). It cannot be displayed on a television using any other video output type.
10.3 RECORDING AUDIO MANUALL Y
With the ARCHOS, you have the possibility to record audio from most
RECORDING PROCEDURE
Connect your audio source's outputs to the ARCHOS' inputs.
MANUAL
V1.0
,
,
1000kb/s
1500kb/s
,
. This is the sound sampling rate. The higher value gives a higher
48kHz
"
"/ "
Automatic
Manual
Adjusts the level of blue (only when the source outputs a component
Adjusts the level of red (only when the source outputs a component signal).
OTHER RECORDING FUNCTIONS > P. 70
,
,
2000kb/s
2500kb/s
". Allows you to adjust the 3 RGB color levels
. Use this to set the encoding
Advertisement
Table of Contents
