Table of Contents
Advertisement
TV+
* Most networks support DHCP.
•
ured manually, use the left/right ar-
rows to select the "
on the "
•
Other parameters will appear: the
required information can be ob-
tained from the person who man-
ages the network.
and your ARCHOS will connect to this network, provided the signal is strong enough.
Protected Networks (WEP, WPA or WPA2 KEY)
•
Protected networks require an en-
cryption key to connect.
•
The type of key (WEP, WPA or
WPA2) will be detected automati-
cally by your device.
•
The rest of the required information
can be obtained from the person
who manages the network.
You will have to specify the following settings:
"Key length" (for WEP networks only)
-
"Key format" (for WEP networks only)
in some cases you may need to change the key format in order to enter a pass-
-
phrase/password. See the documentation that came with your WiFi router or modem.
"Key" (WEP or WPA)
press OK, enter the encryption key using the remote control's keyboard and press
-
OK again to validate.
"Authentication" (for WEP networks only)
the network's authentication method can be based on an "
-
" or a "
fault)
Shared Key
MANUAL
V1.0
-
" setting
Manual
" parameter.
".
MAIN SETTINGS > P. 51
" button,
Connect
Open System (de-
Advertisement
Table of Contents
