Table of Contents
Advertisement
TV+
VERIFYING THE CHANNEL LIST
From the "
TV Control
2.
Verify that the channel list on the ARCHOS is the same as on your tuner.
3.
Here you can deselect/select a channel or change the number of a channel.
SETTING THE IR EMITTER
•
The ARCHOS has a high-powered infrared LED, located on the front of the device,
at the same place as the infrared receiver.
•
It allows your ARCHOS TV
ellite receiver or Digital TV receiver), so that it can turn it on and off, and change
channels on it.
•
This is a one time step to set your ARCHOS device to send the correct infrared
codes to control your tuner. If you do not plan on making scheduled recordings,
then you do not need to set the infrared emitter code.
st
1
Test: turning your tuner off
From the "
TV Control
lows you to correctly set the codes and parameters so that the ARCHOS can turn
your tuner on/off automatically (for a scheduled recording).
2.
"
": select the type of tuner that you want to control with the IR
TV Receiver
Emitter ("
VCR
"
").
Digital TV
3.
"
Receiver brand
buttons
on the remote control to scroll the list faster.
MANUAL
V1.0
" screen, select "
to communicate with your tuner (VCR, cable box, sat-
+
" screen, select "
", "
Cable/DSL box
": choose the brand of your tuner. You can use the Accelerator
Set TV Channel List
Set Infrared Emitter
", "
Satellite Receiver
THE TV PROGRAM GUIDE > P. 64
".
". This first screen al-
", "
DVD Recorder
" or
Advertisement
Table of Contents
