Chapter 12 Modifying Password, Sign Out And Logout; Chapter 13 Troubleshooting - Reach CL4000 Beyonsys User Manual

Chapter 12 Modifying Password, Sign out and Exit
After sign in the device on the Web, the links of "Change Password", "Sign out" and
"Exit" will displayed on the top right corner all the time.
To change the password of the current user, click "Change Password". Note: The
administrator cannot change the password of other users. Only the user can change the
password for himself after logging on.
Click "Sign out" to go back to the log-on page, and re-enter the log-on information to
sign in.
Click "Exit" to shut down the browser and log out the system.

Chapter 13 Troubleshooting

Unable to start
Please try the following operations:
Make sure that there is power supply for the power socket.
Connect the power cables properly.
Turn on the power switch of the product.
The computer could not sign in the Web interface
Make sure that the computer and the product are connected in the same
interconnected network.
Make sure that the network parameters (such as IP address) of the
computer and the product have been set properly according to the
requirements of the network administrator.
Use the network tool and software to test the network connection between
the computer and the product. For example, use the ping command.
If you still could not sign in the web interface, please contact the network
administrator.
There is no sound or/and image when played through the computer
Copyright © Shenzhen Reach IT Co., Ltd.
REACH CL4000（Beyonsys™）
User Manual