Mytee PowerGlide HD-17 Instruction Manual page 4

HD17 / HD20 POWERGLIDE™
ADjuSTmENT HEIGHT LEVER
The handle can be adjusted to any desired working position by
simply squeezing the adjustment lever. Move the handle to the
desired position, then release adjustment lever locking handle
in place.
BRuSH AND PAD DRIVER INSTALLATION
ON
Note: Disconnect the power cord from electrical outlet before
installing a brush or pad driver. ON - Push the brush or pad driver
firmly in position, then turn it counter-clockwise until it locks into
place. REMOVE - Turn clockwise until it stops, then lift off.
Once you release adjustment height lever, handle will lock on
to gear.
OFF
When not in use, loosely wind the power cord around the cord
storage hook on the handle shaft and handle grip.
4
POSITION GEAR
CORD STORAGE HOOK