Configuring Basic Network Settings; Connecting To The Edgemarc For The First Time - Edgewater Networks EdgeMarc 250AE Hardware Installation Manual

This chapter explains how to connect to the EdgeMarc and access the
graphical user interface (GUI) to configure basic network settings for the
first time. Refer to the EdgeMarc User Guide for complete details on how to
configure your EdgeMarc device for your network deployment.




Connecting to the EdgeMarc for the First Time

The LAN interface ports are pre-configured with the IP address
192.168.1.1.
1.
2.
3.
4.
5.
© 2014 Edgewater Networks. All Rights Reserved.
Configuring Basic Network
Connecting to the EdgeMarc for the First Time
Changing Your Password
Deploying the EdgeMarc 250AE Appliance
Connect a computer to Ethernet LAN interface port 1 using an Ethernet
cable or connect to an Ethernet switch (using the IP address
192.168.1.2 and subnet mask 255.255.255.0).
Launch a web browser on your computer and enter the following URL:
http://192.168.1.1.
Press Return. The EdgeMarc login screen is displayed.
Enter your initial username in the field provided: root
Enter your initial password in the field provided: default
3
Settings
11