Override Mode - Samsung F23HTEDBSR User Manual

• Delay Appliance Load (L3): The refrigerator
responds to a DAL signal by providing a
moderate load reduction for the duration of the
delay period.
This function controls functions that consume
a lot of energy such as adjusting the Cooling
system, running the defrost cycle, and making
ice.
- When the refrigerator operates in DAL (L3)
mode, "L3" is displayed on the refrigerator
display.
- DAL mode is automatically deactivated after
it lasts for the amount of time stipulated by
the DAL signal (max. 4.5 hours) or when the
Override key is pressed.
• Temporary Appliance Load Reduction (L4):
The refrigerator responds to a TALR signal by
aggressively reducing the load for a short time
period.
This function reduces energy consumption by
stopping the compressor and controlling the
functions that consume a lot of energy such as
the defrost cycle and making ice.)
- When the refrigerator operates in TALR (L4)
mode, "L4" is displayed on the refrigerator
display.
- TALR (L4) mode is automatically deactivated
after it lasts for the received duration (max. 15
minutes), or when the Override key is pressed.
The mode is immediately deactivated and the
refrigerator returns to the normal state when
the door is opened or closed, or the dispenser
is used.

Override Mode

When you want the refrigerator to ignore the
SMART GRID (Demand Response) signal from
the Utility Company, you can activate OVERRIDE
mode.
When you activate OVERRIDE mode, the
refrigerator ignores the SMART GRID (Demand
Response) signal and is not controlled by the Utility
Company.
DA68-02954B-02.indb 25 DA68-02954B-02.indb 25
Activating and deactivating Override
mode
1. Press and hold the [Energy Saver] button for 3
seconds.
2. A buzzer sounds and `Or' and `on' is displayed
in the freezer and fridge temperature displays
for 5 seconds.
3. If the refrigerator receives a SMART GRID
(Demand Response) signal from the Utility
Company, `Or' is displayed in the freezer
temperature display.
4. To deactivate OVERRIDE mode, press and hold
the [Energy Saver] button for 3 seconds.
5. A Buzzer sound is played and 'Or' and 'oF' is
displayed in the freezer and fridge temperature
displays for 5 seconds.
Alternatively, you can activate or
deactivate OVERRIDE mode using the
app.
English - 25
2015. 1. 12. 2015. 1. 12. 3:09 3:09