Samsung F23HTEDBSR User Manual page 12

CAUTION
When moving your refrigerator
To prevent fl oor damage, be sure the front
adjusting legs are in the up position (above the
fl oor).
Refer to 'Leveling the Refrigerator' on page 15.
Flat-blade screw
driver (-) driver (-)
Flooring
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the fl oor.
This surface should be strong enough to support a
fully loaded refrigerator.
To protect the fi nish of the fl ooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working.
When moving the refrigerator, you need to pull and
push it straight forwards or back.
Do not wiggle it from side to side.
DA68-02954B-02.indb 12 DA68-02954B-02.indb 12
Control Lever
English - 12
ACCESSORIES AND REQUIRED
TOOLS
The following accessories are included with your
refrigerator:
Hex wrench Fastener
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
Philips Flat-blade screw
screwdriver (+) driver (-)
Allen wrench
Pliers
(3/16") (5 mm)
Shim Hinge Middle
2EA
Socket wrench
(13/32") (10 mm)
2015. 1. 12. 2015. 1. 12. 3:09 3:09