Determining The Status Of Supplies; Conserving Supplies - Lexmark C920 User Manual

Determining the status of supplies

The printer operator panel alerts you once a supply item or maintenance is required. You can also view the status of
supplies in your printer on the operator panel unless the printer is printing or in a busy state. The header or gray area at the
top of the display will indicate the printer is Ready and lets you know if any trays are low. Selecting Status / Supplies on
the display will open the Status / Supplies screen where you can view the status of the various trays and open the
supplies screen to view the current status of your toner cartridge.
Ready. Tray 1 Low, Tray 2 Low...
Status / Supplies
Held jobs

Conserving supplies

Several settings in your application software or on the display let you conserve toner and paper. For more information on
changing these settings, see the Menus and Messages Guide.
Supply Menu selection item
Toner Toner Darkness in the
Defaults
Color toner Black Only Print Mode in the
and color Defaults
photo-
developers
Color toner Color Saver in the Defaults
Quality Menu
Print media Multipage Print in the
Defaults
Duplex in the Defaults
Finishing Menu
Use your software application
or printer driver to send a
Verify Print job.
Maintaining the printer
View supplies
C M
Cyan Toner: OK
Magenta Toner: OK
What the setting does
Lets you adjust the level of toner released on a sheet of print media. The
Quality Menu values range from 1 (lightest setting) to 5 (darkest setting).
Prints black only to conserve your color print supplies.
Quality Menu
Prints colors less vividly to conserve your color toner.
Causes the printer to print the two or more page images on one side of a
Finishing Menu sheet. Values for Multipage Print are 2 Up, 3 Up, 4 Up, 6 Up, 9 Up, 12
Up, and 16 Up. Combined with the duplex setting, Multipage Print lets
you print up to 32 pages on one sheet of paper (16 images on the front
and 16 on the back).
Duplex printing is available when you attach the optional duplex unit. It
lets you print on both sides of a sheet of paper.
Lets you examine the first copy of a multiple-copy job to be sure it is
satisfactory before you print the other copies. If the job is unsatisfactory,
you can cancel the job.
See Printing and deleting held jobs for more information about a
Verify Print job.
Determining the status of supplies
Status / Supplies
View supplies
Ready
Tray 1Low
Y K
86