Setting The Time And Date; Setting The Language - ClearSounds Talk500ER User Manual

Note: You can select the desired LCD function by pressing the num-
ber key. For example: You can press MENU button, then press 5
digit, NAME RECORDING will show.
1 press and release the MENU button until ENTER TIME/DATE is
shown.
2 press the DIAL button. The display shows ENTER TIME and the
hours digits is flashing.
3 Select the current hour using the
button. The minutes will now flash in the display.
4 Select the required minutes using the
DIAL button. The display now shows ENTER DATE and the month
digit is flashing.
5 Select the current month using the
button. The day will now flash in the display.
6 Select the current day using the
button.
7 Exit the set-up mode using the
1 press and release the MENU button until LANGUAGE is shown.
2 press the DIAL button.
3 Select the current language (ENGLISH, ITALIANO, FRANCAIS AND
ESpANoL) using the
4 press button to exit the set-up mode.
Note: The default setting for voice is English, if you select other
languages, the phone will announce the phone number, digits and
phone/CID only.
Setting the Voice prompt YES/No
The telephone is factory preset with all voice features ON. The
volume of the voice features is regulated through the volume HI/LO
slide switch.
If you do not wish to hear the voice prompts, you can turn off the
voice feature.
1 press and release the MENU button until VOICE is shown.
2 press the DIAL button.
3 Using the
with DIAL button.
4 press button to exit the set-up mode.
Setting the TIME and DATE

Setting the Language

or and confirm with DIAL button.
or to select between VOICE ON or OFF and confirm
or
or
or
button.
6 – ENGLISH
and confirm with DIAL
or and confirm with
and confirm with DIAL
and confirm with DIAL