Table of Contents
Advertisement
7.10 Printer Sharing in the PSF/2 Environment
To enable the printer to start other print jobs from another protocol, interface or server,
the PSF/2 tuning option Job Interval Shutdown Timer is used.
Important:
The End-of-Job Timeout has to be disabled (set to 0) in order to
prevent the print server or adapter from releasing the TCP/IP
protocol. See Setting the End-of-Job Timeout on page 84.
Use the following steps to set the Job Interval Shutdown Timer option:
1.
Start the PSF/2 control panel by selecting the PSF/2 folder and then the
PSF/2 Control Panel icon.
2.
On the PSF/2 Control Panel select |Profile| and then |Change|.
117
Advertisement
Table of Contents
