Table of Contents
Advertisement
A.6 For Direct Twinaxial Attachment
Hardware Compatibility
When the printer contains the optional SIMM for IPDS and the Adapter for SCS with a
twinaxial cable, the printer attaches to the following IBM hardware:
N
AS/400 Twinaxial Workstation Controllers
N
AS/400 Advanced System/36 Twinaxial Workstation Controller
N
5494 Remote Control Unit
N
5394 Remote Control Unit
N
AS/Entry Workstation Control Unit
N
System/36 Workstation Control Unit (with IBM 4028 emulation)
Note:
There must be separate twinax addresses, one for the Adapter for SCS and
another for the SIMM for IPDS.
150
Advertisement
Table of Contents
