Selecting A Tractor Mode; Selecting And Locking A Font; Disabling Font Lock - Lexmark 2500 User Manual

Selecting a Tractor mode

Note: Because this function unloads continuous forms from the currently selected tractor, tear off excess paper prior
to initiating.
When the optional Tractor 2 Feeder is installed, you can press Tractor to unload the current continuous forms and
switch to the continuous forms loaded in the other tractor source.
The Tractor 2 light comes on when the optional Tractor 2 Feeder is selected.

Selecting and locking a font

The printer data stream may contain control codes which select a particular font. To override the codes, you can
select and lock a particular font of your choice.
1
To select a font, press Font repeatedly until you see the font light on next to the selection you want.
2
Continue pressing Font until the Font Lock light comes on, and the font you want is selected.
The font is locked until the printer is turned off.

Disabling Font Lock

1
To disable Font Lock, press Font repeatedly until the Font Lock light turns off and the font you want is selected.
2
If the printer is offline, press Start/Stop.
The printer is ready to print when the Ready light comes on.
Using the control panel
21