Lexmark 2500 User Manual page 18

Button Function
Tear Off Alternates the paper between Tear Off and Top-Of-Form
6
7 Start/Stop Communicates the on/off status of the printer
Layer 2 control panel buttons
Button Function
LineFeed Advances the paper one line. Press and hold LineFeed to advance the paper 5 micro movements, and
1
then go into continuous feed.
Macro To support different styles of pre-printed forms, selects between four document formats
2
3 Setup Press to enter Setup mode. Lets you change the default values and modes of printer operation.
4 Feeds the paper downward in small incremental movements. Press and hold to select continuous feed.
Micro
5 Pitch Sets the character pitch to: 10 cpi, 12 cpi, 15 cpi, 17 cpi, 20 cpi, or proportional spacing
Notes:
•
On 2590/2591 models, you can also select 24 cpi.
•
Fast Draft supports only 10, 12, and 15 pitch.
6 Feeds the paper upward in small incremental movements. Press and hold to select continuous feed.
Micro
Using the control panel
18