Step 3: Prepare Your Printer - Lexmark N5 Getting Started

Step 3:
Prepare your printer
Unpack and set up your printer. For help, refer to the
1
instructions that came with your printer.
To help configure your printer on the network:
2
Do not connect your printer to your computer;
however, if you have already done so, disconnect the
USB or parallel cable.
Do not install the printer software; however, if you
have already done so, you do not need to uninstall it.
Place the printer next to your printer adapter.
3
Note: If necessary, disconnect the printer
power supply, and then reconnect it at its
new location.
Make sure the printer power light is on.
4
Note: Your printer may look different from the
one shown.
3 Setup