The Lexmark printer software installation
screen does not appear
Close all open software applications.
1
Restart your computer.
2
Reinsert the printer software CD.
3
If the software installation screen appears, continue
with step
on page 13.
3
If not, continue with the following steps:
a
From your desktop, double-click My
Computer.
b
Double-click the CD-ROM drive icon.
c
If necessary, double-click setup.exe.
d
Continue with step
An error message appears
Follow the instructions on any error message that appears on
your computer screen. Click the ? or Help button for additional
information.
Troubleshooting
on page 13.
3
My network printer does not appear in the
list of available printers
•
Make sure the computer's wireless adapter network
settings have been restored to their original values.
Note:
Refer to the values you wrote down in step
page 8.
•
Unplug the printer adapter power supply, and then plug
it in again.
•
Make sure all cables to the printer, printer adapter,
electrical outlet, and network connection are secure
(pages 4 through 5).
•
Click Refresh.
•
If your printer adapter is connected to a laser printer, run
the Network Configuration Utility. For help, see "Laser
printers" on page 35.
•
If your network printer is on a remote subnet, click Add
Printer, and then follow the instructions on your screen.
•
Restart the computer.
28
on
11