Lexmark N5 Getting Started page 25

Laser 2 (software previously installed)
Follow the instructions for your operating system.
Windows 98/Me, Windows NT 4.0, and Windows 2000
From the Start menu, click Settings
1
Right-click the icon for your network printer.
2
Make sure Set as Default is selected and Use Printer
3
Offline is not selected, and then click Properties.
Click the Details or Port tab.
4
From the Print to the following port: menu, select the
5
printer port that consists of the printer name followed
by the last six characters of the printer adapter MAC
address (for example, Lexmark_E320_0035D0).
Note: If there is not a printer port that
corresponds to the printer adapter MAC
address, see "Manually configure the
network printer" on page 34.
Click OK.
6
You are finished setting up your computer to work with your
network laser printer; however, the printer port must be
defined and the printer software must be installed on each
computer that uses the network printer.
Setup
Setting up other computers on your network
1
Printers.
2
3
20
Insert the Lexmark Printer Adapter Installation
Software CD.
When the software installation screen appears, click
Install Now.
Click Next on the InstallShield Wizard screen.