Table of Contents
Advertisement
Windows XP
From the Start menu, click Control Panel
1
and Other Hardware
printers.
Right-click the icon for your network printer.
2
Make sure Use Printer Offline is not selected, and
3
then click Properties.
From the Ports tab, select the printer port that
4
consists of the printer name followed by the last six
characters of the printer adapter MAC address (for
example, Lexmark_E320_0035D0).
Note:
If there is not a printer port that
corresponds to the printer adapter MAC
address, see "Manually configure the
network printer" on page 34.
Click OK.
5
Printers
View installed printers or fax
Check the printer status
From the Start menu, click Settings
1
From the Printers folder, right-click the icon for your
2
network printer.
Make sure Set as Default is selected and Use Printer
3
Offline is not selected.
Specify a fixed IP address
Your printer adapter supports Dynamic Host Configuration
Protocol (DHCP). When DHCP is active, an IP address is
automatically assigned each time the printer adapter is
connected to the network.
If you prefer to specify a fixed IP address rather than use
DHCP or other automatic IP addressing supported by your
printer adapter, turn off DHCP on the Connect to the Network
(Manual) screen.
For help accessing the Connect to the Network (Manual)
screen, follow steps
37
Printers.
through
on pages 32 through 33.
1
4
How Do I...?
Advertisement
Table of Contents
