Large Screen Only Display Part Of The Image; Signal Need To Scale; No Display In The Second Half Part Of Large Screen; Resolution Is Inadequate - RGBlink VSP 628S User Manual

Large Screen only Display Part of the Image

Signal need to scale

Press 【SCALE】button in the processor and knob to adjust the actual
screen size of the screen, combined with button 【POSITION】 , including the
"Width", "Height" and "Starting position", remember to touch the knob to
confirm.

No Display in the Second Half Part of Large Screen

Resolution is inadequate

Please make sure the points of the screen width and heigh, choose the
resolution to be bigger than screen width by button【MENU】 under
OUTPUT RES, and touch knob to confirm.

Sending card can't take lower part

TS 802 can control the max horizontal resolution 2048, and vertical
resolution 640. Each CAT5 output is 320 pixels.

Left of the Screen Appears Two Black Sides

Adjust DE deviation

This phenomenon needs to adjust the DVI output and DE migration of the
processor, through the 【MENU】 to find "OUTPUT" and find the
corresponding output name, such as "DVI1 OUT ADJUST", and find "DVI1
VSP 628S User Manual 86