Table of Contents
Advertisement
5. Communication Software Guideline
How to control processor through RS232?
Check and tap【Serial】, Serial Port , for example, is COM6 which is
checked from device manager. Set VSP 628S Baud Rate to be :115200,
Click【Confirm】after setting.
Click
when there is the prompt green
software, it means the communication is ok , and you can use the software
to control the device now.
VSP 628S
【 open serial】 , check if 【 COM】 icon on the bottom right corner,
Note
If power off during communication, should close
the por
t
and do communication.
User Manual
showing on the
, by first, and plug in out of the USB
68
Advertisement
Table of Contents
