RGBlink VSP 628S User Manual page 43

Spin the knob to SYSTEM in the Menu and push the knob to confirm, then
the LCD screen displays the secondary menu as:
SERIAL NUMBER：It is the Factory serial number of VSP 628S which is
used to search the information of VSP 628S.
FIRMWARE VERSION：It is the information of VSP 628S software which
contains the following two versions:
FPAG VERSION: Information of FPGA version.
COM. VERSION: Information of COM. version.
IP ADDRESS：Information of IP.
TIMMER：Rotate the knob to TIMMER and push the knob to confirm;
Rotate the knob for DISABLE or ENABLE setting.
MENU--- TECH SUPPORT
TECH SUPPORT: Information of technology support as:
EMAIL: Email of technology support.
PHONE: Phone of technology support.
WEB SITE: Company web site of technology support.
FAX: Fax of technology support.
MENU--- RESET
RESET: Enter RESET interface and press the knob to confirm; Rotate the
knob to YES and push the knob to confirm; then VSP 628S is resetting to
its factory settings. After 5 seconds, it completes factory settings and is
ready for more operations.
VSP 628S User Manual 43