RGBlink VSP 628S User Manual page 82

6. System Setup and Operations
How to add tasks
mode, and check whether to use fade during dual channel mode.
5. Users can control the image position and size by change the data or click
the drop-down arrow.
6. When device works under the single channel mode, click the interface
Icon. Red box indicates current interface has been selected as the input
interface;
When device works under the dual channel mode, need to switch image 1
and image 2 set input signal one by one.
Users can see the image 1 and image 2 input source information in the
input source toolbar after setting. Shown as the picture:
Select CV1 as the input source of image 1:
VSP 628S User Manual 82