Autostart AS-1260 Installation Manual
  1. Manuals
  2. Brands
  3. Autostart Manuals
  4. Remote Starter
  5. AS-1260
  6. Installation manual

Autostart AS-1260 Installation Manual

Transmission remote starter & keyless entry system
Hide thumbs
Table of Contents

Advertisement

Quick Links

AS-1260/1263/1264/1265 SH
Manual transmission remote starter & keyless entry system.
What's included.................................. 2
Install points to remember.................... 2
Features........................................... 2
Options.............................................2
Programmable options..........................2
Transmitter code learning......................3
Tach Adjustment............................... 3
Manual Tach adjustment................... .. 3
Door lock toggle mode..........................4
Options Playback.............................. 5
Tach Watch Lockout...................... ...... 5
NOTICE:
DUE TO THE POTENTIAL FOR DAMAGE TO THE VEHICLE, THE MANUFACTURER IS NOT
RESPONSIBLE FOR ANY ELECTRICAL DAMAGE TO THE VEHICLE OR TO THE UNIT THAT HAS
CAUSED VEHICLE DAMAGE DUE TO IMPROPER INSTALLATION OF THE PRODUCT.
THIS UNIT MUST BE INSTALLED BY AN AUTHORIZED AUTOSTART TRAINED TECHNICIAN
USING ALL SAFETY DEVICES SUPPLIED.
Please review the installation guide carefully before any work begins.
WARNING
THIS UNIT IS FOR MANUAL TRANSMISSION ONLY, BEFORE INSTALLING THE UNIT TEST
THAT THE VEHICLES OEM DOOR SWITCH CONTACTS WORK WELL, AND THAT THE
PARKING BRAKE SYSTEM OPERATES PROPERLLY.
DO NOT INSTALL ON CONVERTIBLE VEHICLES UNLESS A RADAR SENSOR IS USED.
Rev: 2.01 La - 08/09/01 Manufactured in Canada by AUTOSTART
AUTOSTART
INSTALLATION GUIDE

Table of Contents

Diesel Engine...................................... .5
Getting into Ready-Mode..........................5
Staying in Ready-Mode............................5
Clutch bypass.........................................5
Parking Brake Wire................................6
Trunk output........................................ 6
Module Reset.........................................6
Secure lock.......................................... 6
Problems & Solutions.............................7
Harness Description................................8
Light flash rate.....................................9
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AS-1260 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Autostart AS-1260

Summary of Contents for Autostart AS-1260

  • Page 1: Table Of Contents

    RESPONSIBLE FOR ANY ELECTRICAL DAMAGE TO THE VEHICLE OR TO THE UNIT THAT HAS CAUSED VEHICLE DAMAGE DUE TO IMPROPER INSTALLATION OF THE PRODUCT. THIS UNIT MUST BE INSTALLED BY AN AUTHORIZED AUTOSTART TRAINED TECHNICIAN USING ALL SAFETY DEVICES SUPPLIED.

  • Page 2: What's Included

    WHAT’S INCLUDED FEATURES • Please review the installation guide before Multi channel/button transmitter. beginning the installation, particularly the • Dual 12-volt power lines. wiring diagram and the list of programming • 12-volt Parking lights output. options. Prior to installation please be sure that all •...

  • Page 3: Transmitter Code Learning

    6. Start the vehicle using the key. operation. 7. If Parking lights stays ON, then you have This allows the owner of two Autostart systems in selected an incorrect Tach wire. (Relocate two of his/her vehicles to control both systems with Tach wire and start from step 1) If Parking one transmitter.

  • Page 4: Custom Programming Options

    6. Now you can increase or decrease the Tach MODE 1 settings, depending on your needs. 7. LOCK will decrease the setting and START *INDICATES DEFAULT SETTING will increase the setting. 8. After proper setting has been reached, press TRUNK to save setting. (Parking lights should FUNCTION 1 flash once long) OPTION 1*...

  • Page 5: Options Playback

    FUNCTION 4 TACH WATCH LOCKOUT OPTION 1* External trigger disabled. Tach Watch lockout is a safety feature built into OPTION 2 External trigger enabled. the remote starter to protect the vehicle’s starter motor. If, during remote start, the vehicle’s engine ever cranks the entire programmed crank FUNCTION 5 time without detecting any Tach pulses during the first crank cycle, the unit will go into Tach...

  • Page 6: Clutch Bypass

    Mode is restored? RESETING THE MODULE 1. Doors opened. 2. Hood opened. All AutoStart’s are equipped with a reset 3. Brakes pressed. function that allows the installer to erase all 4. Parking brake disengaged. transmitter codes and return all programmed 5.

  • Page 7: Problems & Solutions

    SOME COMMON QUESTIONS AND ANSWERS The following are some commonly asked questions about our product, followed by possible answers. Q: Does the Parking brake wire have to be connected? A: Yes the Parking brake wire must absolutely be connected. Q: Do both door trigger wires on the 9-pin harness have to be connected? A: No, only one of the 2 trigger wires must be connected, or the unit will not enter ready mode.

  • Page 8: Harness Description

    HARNESS DESCRIPTION 7-PIN HARNESS PIN # COLOR FUNCTION DESCRIPTION (connect to...) BLACK CHASSIS Ground (to chassis) GROUND VIOLET COIL (-) Tach Vehicle's Tach wire (coil -) GRAY HOOD PIN Hood switch - grounded when hood open SWITCH (-) N / A GLOW-PLUG (+) ORANGE BRAKE SWITCH...

  • Page 9: Light Flash Rate

    LIGHT FLASH RATE FLASHES RATE DESCRIPTION System has reset. Should occur when Valet switch is turned ON. Slow No Tach pulse detected during crank. Should not occur if no pulse is detected with in 2 seconds of cranking ‘the unit will force a reset. If Parking lights stayed ON for 5 seconds then flashed 3 times slowly when Slow Valet switch was turned ON, the unit detected the Ignition line was ON,...

  • Page 10: As-1260/1263/1264/1265 Wiring

    FLASHES RATE DESCRIPTION System has reset. Should occur when Valet switch is turned ON. Slow No Tach pulse detected during crank. Should not occur if no pulse is detected with in 2 seconds of cranking ‘the unit will force a reset. If Parking lights stayed ON for 5 seconds then flashed 3 times slowly when Slow Valet switch was turned ON, the unit detected the Ignition line was ON,...
  • Page 11 AS-1260M /1263M /1264M / AS-1265 / AS-1274 SH WIRING DESCRIPTION ANTENNA* Diode (for optional L.E.D output). Starter wire (to solenoid) This diode is absolutely necessary when installing an L.E.D with a starter kill. Ignition 17 - BLUE ....Trunk output (-). Starter wire (from key) 16 - GREEN .

This manual is also suitable for:

As-1264As-1265 shAs-1263

Table of Contents