Table of Contents
Advertisement
To delete this password in Computer Setup, follow these steps:
1.
Turn on or restart the computer, and then press
Menu" message is displayed at the bottom of the screen.
2.
Press
3.
Use a pointing device or the arrow keys to select Security > Change Password, and then press
enter.
4.
When prompted, type your current password.
5.
When prompted for the new password, leave the field empty, and then press enter.
6.
Read the warning. To continue, select YES.
7.
When prompted to type your new password again, leave the field empty, and then press enter.
8.
To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of
the screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save Changes and Exit, and then press enter.
Your changes go into effect when the computer restarts.
Entering a BIOS administrator password
At the BIOS administrator password prompt, type your password (using the same kind of keys you
used to set the password), and then press enter. After three unsuccessful attempts to enter the BIOS
administrator password, you must restart the computer and try again.
Using Computer Setup DriveLock
CAUTION:
record the DriveLock user password and the DriveLock master password in a safe place away from
your computer. If you forget both DriveLock passwords, the hard drive will be permanently locked and
can no longer be used.
DriveLock protection prevents unauthorized access to the contents of a hard drive. DriveLock can be
applied only to the internal hard drive(s) of the computer. After DriveLock protection is applied to a
drive, a password must be entered to access the drive. The drive must be inserted into the computer
or an advanced port replicator in order for it to be accessed by the DriveLock passwords.
To apply DriveLock protection to an internal hard drive, a user password and a master password
must be set in Computer Setup. Note the following considerations about using DriveLock protection:
●
After DriveLock protection is applied to a hard drive, the hard drive can be accessed only by
entering either the user password or the master password.
●
The owner of the user password should be the day-to-day user of the protected hard drive. The
owner of the master password may be either a system administrator or the day-to-day user.
●
The user password and the master password can be identical.
●
You can delete a user password or master password only by removing DriveLock protection
from the drive. DriveLock protection can be removed from the drive only with the master
password.
Downloaded from LpManual.com Manuals
f10
to enter BIOS Setup.
To prevent the DriveLock-protected hard drive from becoming permanently unusable,
esc
while the "Press the ESC key for Startup
Using passwords 103
Advertisement
Table of Contents
Troubleshooting
