Lexicon PCM 80 User Manual page 29

2.0 Bank Copy
This control allows you to copy banks of effects from one location to another.
Banks can be copied internally, or to and from PCMCIA Memory Cards. Try, for
example, copying Preset Bank 0 into the internal Register Bank.
1. Press Store. The following display will appear briefly.
Select and copy
effect banks
The display will then change to show:
Card Bank Copy
2.0 Src: P0 Dst: R
The asterisk indicates that Src is available for adjustment. ADJUST will
scroll through all available banks, including internal preset and register
banks, as well as any banks on inserted PCMCIA cards. Internal banks are
labeled "P0...P3" and "R1". Card registers will be labeled "C0, C1, C2" etc.
2. Press Load/ to move the asterisk to Dst.
Card
2.0 Src: P0 Dst: R
Now, use ADJUST to select the destination of your copy. Selecting a
register bank here will cause its contents to be erased and overwritten
with the bank you have selected as the source when Store is pressed.
4. Press Store to copy the selected source (in this case Preset Bank 0) into the
internal Register Bank. The display will ask "Are you sure?" (Press STORE).
Press any button to cancel. Press Store to complete the store operation.
2.1 Load
This control is provided for future enhancement. It will allow you to load audio
software from a Memory Card simply by inserting the new card and responding
to the display prompts.
Bank Copy
Basic Operation
Row 2
Card
2-11