Advertisement
Product Warranty Information
The Wilbur Curtis Co., Inc. certifies that its products are free from defects in material and workmanship under normal use. The following limited war-
ranties and conditions apply:
3 Years, Parts and Labor, from Original Date of Purchase on digital control boards.
2 Years, Parts, from Original Date of Purchase on all other electrical components, fittings and tubing.
1 Year, Labor, from Original Date of Purchase on all electrical components, fittings and tubing.
Additionally, the Wilbur Curtis Co., Inc. warrants its Grinding Burrs for Forty (40) months from date of purchase or 40,000 pounds of coffee, whichever
comes first. Stainless Steel components are warranted for two (2) years from date of purchase against leaking or pitting and replacement parts are war-
ranted for ninety (90) days from date of purchase or for the remainder of the limited warranty period of the equipment in which the component is installed.
All in-warranty service calls must have prior authorization. For Authorization, call the Technical Support Department at 1-800-995-0417. Effective date
of this policy is April 1, 2003.
Additional conditions may apply. Go to www.wilburcurtis.com to view the full product warranty information.
CONDITIONS & EXCEPTIONS
The warranty covers original equipment at time of purchase only. The Wilbur Curtis Co., Inc., assumes no responsibility for substitute replacement parts
installed on Curtis equipment that have not been purchased from Wilbur Curtis Co., Inc. The Wilbur Curtis Co., Inc. will not accept any responsibility if
the following conditions are not met. The warranty does not cover and is void under the following circumstances:
1)
Improper operation of equipment: The equipment must be used for its designed and intended purpose and function.
2)
Improper installation of equipment: This equipment must be installed by a professional technician and must comply with all local electrical,
mechanical and plumbing codes.
3)
Improper voltage: Equipment must be installed at the voltage stated on the serial plate supplied with this equipment.
4)
Improper water supply: This includes, but is not limited to, excessive or low water pressure, and inadequate or fluctuating water flow rate.
5)
Adjustments and cleaning: The resetting of safety thermostats and circuit breakers, programming and temperature adjustments are the respon-
sibility of the equipment owner. The owner is responsible for proper cleaning and regular maintenance of this equipment.
6)
Damaged in transit: Equipment damaged in transit is the responsibility of the freight company and a claim should be made with the carrier.
7)
Abuse or neglect (including failure to periodically clean or remove lime accumulations): Manufacturer is not responsible for variation in
equipment operation due to excessive lime or local water conditions. The equipment must be maintained according to the manufacturer's recom-
mendations.
8)
Replacement of items subject to normal use and wear: This shall include, but is not limited to, light bulbs, shear disks, "0" rings, gaskets,
silicone tube, canister assemblies, whipper chambers and plates, mixing bowls, agitation assemblies and whipper propellers.
9)
Repairs and/or Replacements are subject to our decision that the workmanship or parts were faulty and the defects showed up under normal
use. All labor shall be performed during regular working hours. Overtime charges are the responsibility of the owner. Charges incurred by delays,
waiting time, or operating restrictions that hinder the service technician's ability to perform service is the responsibility of the owner of the equipment.
This includes institutional and correctional facilities. The Wilbur Curtis Co., Inc. will allow up to 100 miles, round trip, per in-warranty service call.
RETURN MERCHANDISE AUTHORIZATION: All claims under this warranty must be submitted to the Wilbur Curtis Co., Inc. Technical Support
Department prior to performing any repair work or return of this equipment to the factory. All returned equipment must be repackaged properly in the
original carton. No units will be accepted if they are damaged in transit due to improper packaging. NO UNITS OR PARTS WILL BE ACCEPTED
WITHOUT A RETURN MERCHANDISE AUTHORIZATION (RMA). RMA NUMBER MUST BE MARKED ON THE CARTON OR SHIPPING LA-
BEL. All in-warranty service calls must be performed by an authorized service agent. Call the Wilbur Curtis Technical Support Department to find an
agent near you.
ECN 16087 . 8/22/14@14.8 . rev E
ECN 15879 . 5/20/14@10.5 . rev D
WILBUR CURTIS CO., INC.
ECN 15460 . 11/8/13@11.9 . revC
ECN 15104 . 6/14/13 @ 13.5 . revB
6913 Acco St., Montebello, CA 90640-5403 USA
ECN 14810 . 3/6/13@10.9 . revA
Phone: 800/421-6150
EDR 8502 . 10/26/12 . EAR 11023
Technical Support Phone: 800/995-0417 (M-F 5:30A - 4:00P PST)
Web Site: www.wilburcurtis.com
Fax: 323-837-2410
E-Mail: techsupport@wilburcurtis.com
Printed in U.S.A. 11/2014 . F-3900 . rev E
Advertisement
