Sanyo SHAKC64AGB Instruction Manual page 4

System Controller
K: CHECK button
CAUTION
L: CENTRAL CTRL button
M: SET button
N: CL button
O: VENTILATION button
This button is used only when servicing the air conditioner.
Do not use the CHECK button for normal operation.
Use this button to inhibit individual operation by remote controller as follows:
1: Individual ON/OFF operation is inhibited.
2: Individual ON/OFF, MODE and Temperature setting operation is inhibited.
3: Individual MODE and Temperature setting operation is inhibited.
4: Individual MODE operation is inhibited.
No indication: Central control is cleared. (Individual operation)
This button is used for setting indoor unit's address when installing the air conditioner.
NOTE Do not use the SET button for normal operation.
Use this button to reset the filter sign
The air conditioner has the timer for the filter and informs you when the filter needs cleaning
Use this button when you installed a fan available in the market.
Pressing this button turns on and off the fan.
When turning off the air conditioner, the fan will also turned off. While
the fan is operating,
* If " " is shown on the display of the remote control unit when the VENTILATION but-
ton is pressed, this indicates that the ventilation fan is not connected.
.
will appear in the display.
3