Developer Required; Maintenance Required - Sharp AR-122E Operation Manual

4
Raise the fusing unit release lever, close the front cover and
then close the side cover by pressing the round projections
near the side cover open button. The misfeed (
go out and the start (

DEVELOPER REQUIRED

When the developer replacement required (
should be replaced. DEVELOPER REPLACEMENT SHOULD ONLY BE DONE BY
AN AUTORIZED SHARP SERVICE TECHNICIAN. Contact your service centre as
soon as possible.

MAINTENANCE REQUIRED

When maintenance (
service technician is required. Contact your service centre as soon as possible.
) indicator will light up.
) indicator lights up, service by an authorised SHARP
) indicator will
) indicator lights up, the developer
6
31