Set Schedule; Disable Schedule - Pandigital PAN7000DWFR User Manual

1. On the
select the
2. Select the desired media source from the

Set Schedule

You can schedule the DPF to automatically go into a "stand-by"
mode and resume operation according to your weekly schedule. For
example, if you have your DPF on your desk at work, you may want
to display the calendar/clock or play a slideshow from 8:30am to
5:30pm every weekday, and then set the DPF to remain in stand-by
mode throughout the weekend. The following Monday morning, the
DPF would resume operation at 8:30am.
1. On the
2. Select
3. Use
field values in
4. To set the
Schedule
5. Use
field values in
6. When correct times are set, select
screen.

Disable Schedule

After the schedule has been set (per above instructions), you can
disable the schedule whenever desired.
1. On the
2. Select
Schedule
will display
3. Select
4. Press
30
CALENDAR/CLOCK
Media Source
CALENDAR/CLOCK
Set Schedule
.
to move between the fields and
Weekdays On/Off
Weekends On/Off
button, and then use
to move between the fields and
Weekends On/Off
CALENDAR/CLOCK
Set Schedule
, and then select the
Enable Weekends Schedule
or
OFF
.
Done
.
EXIT
to return to the previous screen.
screen, press
button in the upper right corner.
Select Media
screen, press
.
Enable Weekends
, select the
to access the settings.
.
Done
to return to the previous
screen, press
Enable Weekdays
MENU
, and then
screen.
MENU
.
to change the
to change the
MENU
.
button. The time fields