Run Schedule; Disable Schedule - Pandigital PAN8000DWPCF1 User Manual

3.
Touch an option, and then use the virtual keypad to change the field values.
Repeat for all desired options.
Use
values
TIP: Use the '
ON/OFF.
4.
When correct times are set, select

Run Schedule

After the schedule times have been set (per above instructions), you will use the
function whenever you want the schedule to take effect.
There are two methods for running the schedule, a) during a slideshow or b) from the
CALENDAR/CLOCK
CAUTION: After you select the
activation (i.e., touching the screen, pressing remote control button) and the
schedule will not take effect unless you select this function again to re-activate.
Run Schedule from Slideshow
1. At the beginning of a slideshow, a
seconds in the lower left corner of the screen; touch or press
button.
2. To run the schedule when the
screen and then the
to select the
A small timer clock will appear indicating the schedule is active, and then the DPF will
operate according to the set schedule.
Run Schedule from CALENDAR/CLOCK Screen
1. On the
2. Select
A small timer clock will appear indicating the schedule is active, and then the DPF will
operate according to the set schedule.

Disable Schedule

After the schedule has been set (per above instructions), you can disable the schedule whenever
desired.
CALENDAR/CLOCK
1. On the
2. Select
Set Schedule
to highlight an option, and then use
. Repeat for all desired options.
' and ' ' buttons to toggle the Weekdays and Weekends options
+ -
Done
screen.
Run Schedule
Run Schedule
button when it appears.
Run Schedule
CALENDAR/CLOCK
screen, touch the screen or press
.
Run Schedule
screen, touch the screen or press
.
to save the settings.
function, any user intervention will cancel the
button appears for approximately 10
Run Schedule
button is no longer displayed, touch the
Run Schedule
button, or restart your slideshow and press
to change the field
Run Schedule
to activate the
ENTER
ENTER
.
MENU
MENU .
25