Storing The Photolink Scanner - Pandigital PhotoLink PANSCN02 User Manual

1. Follow the instructions beginning on page 25 to clean the
Note: Make sure that the calibration card is inserted in the
Storing the
If the scanner will not be used for a prolonged period of time,
follow the instructions below to store the scanner for future use.
1. Disconnect the scanner from power supply.
2. Place the scanner and power adapter in a box or bag to
keep them from accumulating dust.
3. Place it in a cool and dry place, inaccessible to small
children.
4. After long-term storage, it is recommended that you clean
and calibrate the scanner before use.
28
roller and the image sensor, and then follow the instruction
in "Initial Setup" on page 12 to prepare the scanner for
scanning.
correct direction, otherwise the calibration won't work.
PhotoLink
2. Insert the calibration card as
shown. The scanner will scan
the pattern on the calibration
card and perform calibration to
the sensor inside automatically.
Scanner