Pandigital PhotoLink PANSCN02 User Manual page 11

Curled photo
1. Insert the photo into the plastic sheath as shown below.
2. Insert the plastic sheath into the feeding slot of the scanner flat
and level as shown below.
Notes:
Keeping the original flat and level when feeding prevents
possible jamming.
Keep originals free from finger prints, oil, dirt, and dust for
optimum scanned image quality.
Remove photos from the plastic sheath after scanning to
prevent the sheath from sticking to the photos over time.
If the plastic sheaths are not in use, store them in a safe place
and keep them protected from accumulating dust.
Fuzzy areas that result
from the uneven surface
of the curled photo
11