Table of Contents
Advertisement
N_Max Wireless CardBus Adapter
Fragment Thre-
shold
RTS/CTS Thre-
shold
802.11n
Enable 802.11n
Network
Channel Width
Guard Interval
Extension Chan-
nel
Antenna Selection
WPS Function Screen
The Wi-Fi Protected Setup (WPS) is to simplify the security setup and management of
Wi-Fi networks. WPS (Wi-Fi Protected Setup) allows consumers to protect their home
networks by using the push button configuration on the router, or entering an 8-digit PIN
code if there's no button.
You will see the WPS screen when you try to connect the wireless network with the
WPS function.
The default value is 2346. In some cases, you may be able to
improve performance by adjusting this value.
The default value is 2346. In some cases, you may be able to
improve performance by adjusting this value.
802.11n wireless network connectivity
The width of the Channel, either 20Mhz or 40Mhz. The default
value is set as "Auto."
This is used to ensure that transmissions do not interfere with
each other. This value is set as "Auto"
Auto selects the wireless channel. The value is set to "Auto" It
will auto select the most suitable channel.
The default value is set to "Auto".
Figure: WPS Function Screen
16
Advertisement
Table of Contents
