Table of Contents
Advertisement
N_Max Wireless CardBus Adapter
Data - WPS Function Screen
Network Name(SSID)
Push the Button on
my access point
Enter a PIN into my
access point
Enter the PIN from my
access point
You will see the following screen if WPS configuration is success:
Select the desired wireless network from the drop-down list.
Select this and click Start button. Then push the WPS
button of the Access Point.
Select this to use the PIN method. It will automatically gen-
erate the new pin code displayed in the field. Click Start
button and copy the value and paste in the Wi-Fi Protected
Setup screen of the Access Point
Select this to use the PIN method. Entering the PIN from
your access point in the Wi-Fi Protected Setup screen of the
Access Point and click "Start" button to continue.
Figure: WPS Success Screen
17
Advertisement
Table of Contents
