Table of Contents
Advertisement
N_Max Wireless CardBus Adapter
Data - Site Survey Screen
Display PC To PC
(Ad-Hoc)
Display 802.11b
Access Points
Display 802.11g
Access Points
Network Name
MAC Address
Security
WPS
CH.
Signal
Frequency
Network Type
Status
Rescan
Wireless Network Sequence (order)
You can click the headings (ex. Network Name, MAC Address, Security...) of the
Wireless network table to arrange the Wireless network in the desired order.
To Connect to a Wireless Network
Double-click on the desired network.
Click the name of the wireless network to which you want to connect, and then click
Connect.
Note that once you are connected to a Wireless network, the Site Survey screen will
identify the current wireless network with a blue icon, as shown below.
Select this check box to display ad-hoc (computer-to-computer)
networks.
Select this check box to display 802.11b (infrastructure) net-
works.
Select this check box to display 802.11g (infrastructure) net-
works.
Available wireless networks are listed.
This is the MAC address of the Access Point (or Wireless sta-
tion, if the network is an Ad-hoc network).
Data encryption and authentication methods used on the wire-
less network
This will indicate "Y" (the Access Point with WPS function), "Y+".
(the WPS function of the Access Point is in used) or "---" (the
Access Point without WPS function)
The channel used by the Wireless network.
This is displayed as percentage (0 ~ 100%).
The Wireless band used by this Wireless network.
This will indicate "Infrastructure" (displayed device is an Access
Point) or "Ad-hoc". (displayed device is a Wireless station)
The area to the left of the "Rescan" button shows the current
status. In the example above, it shows "Connected".
Click this button to rescan for all Wireless networks.
10
Advertisement
Table of Contents
