Setting The Playback Eq (Sound Eq) - Panasonic RR-XS410 Operating Instructions Manual

Setting the playback EQ (SOUND EQ)

Using the sound EQ enables you to set bass, middle and treble range of volume level according to your
preferred settings for playback.
The sound EQ includes 6 types of fixed mode and the "USER" mode with which you can set the volume
level according to each frequency band.
The sound EQ is effective only when listening with the earphones.
• Put the unit into the stopped state or playback state.
1
Press [MENU].
(When playback is in progress, go to step
2
Press +, – to select "PLAY MENU" and press
[q OK] to enter.
3
Press +, – to select "SOUND EQ" and press
[q OK] to enter.
4
Press +, – to select the sound EQ mode.
Press [F1 (CONFIRM)] to confirm the details. Press
[F1] again to return to the previous screen.
When you select modes other than "USER", go to step
Setting when selecting "USER":
4
After step
1
[F1 (EDIT)].
150 Hz band is selected.
Press u, i to select the frequency band to
2
change, and press +, – to adjust the volume level
38
(±6 dB).
38
, press
3 Whe
change are all complete, go to step
5
Press [q OK] to enter.
3
.)
To exit the setting screen, press [F2 (CLOSE)].
EQ mode
5
.
FLAT
BASS
CLEAR
HEAVY
SOFT
VOICE
USER
(The factory setting is "FLAT".)
n the settings for the frequency band to
The selected sound EQ
mode is displayed.
Effect and application
The sound equalizer function is not used. You
hear the original sound without any change.
Emphasise the bass range strongly.
Emphasise the treble range strongly.
Emphasise the bass and treble ranges slightly.
Emphasise the middle range.
Reduce noise to make human voice easily heard.
This mode enables adjustment of frequency bands
of 150 Hz, 500 Hz, 1 kHz, 4 kHz and 12 kHz.
5
.