Front Gauge Wheel [Tires]; Adjusting The Lift Rods - Kubota RCK72P-F39 Operator's Manual

20 MAINTENANCE

FRONT GAUGE WHEEL [TIRES]

To avoid personal injury or death:
A Never exceed the tire pressure shown below
(maximum limit) when attempting to seat a
bead. If beads have not been seated by the time
the pressure reaches maximum limit, deflate
the assembly, reposition the tire on the rim,
lubricate, and reinflate. After seating the bead,
adjust inflation pressure as recommended in
the inflation pressure chart.
Max inflation pressure
Recommend pressure
[Gauge Wheel Inflation Diagram]
(1) Ground
To avoid personal injury:
A Do not attempt to mount a tire unless qualified.
Use proper equipment.
The tire pressure is factory-set to the correct level,
however, tire pressure will drop slowly in the course of
time. Check tire pressure daily and inflate it as necessary.
A When replacing the gauge wheel, check the inflation
pressure of the tires.
350 kPa
(51 psi, 3.6 kgf/cm )
200 kPa
(29 psi, 2.0 kgf/cm )
(A) "INSUFFICIENT"
(B) "NORMAL"
(C) "EXCESSIVE"

ADJUSTING THE LIFT RODS

To avoid personal injury:
A Shut off the engine, set the parking brake, and
remove the key.
1. Park the front mower and the mower deck on a level
ground and set the desired cutting height.
2. Check whether the mower deck is level.
3. If not, adjust the level by the spacers.
(1) Spacers
(2) Mower link