Important - Kubota RCK72P-F39 Operator's Manual

IMPORTANT

To obtain maximum productivity from your mower, the
following procedures should be observed.
To avoid serious injury:
A Before servicing the machine, park the
machine on a firm, level surface, set the
parking brake, stop the engine and remove the
key.
1. Adjust the anti-scalp rollers and wheels according to
the mowing height. Refer to the label below.
This label is also affixed to the mower deck.
[4WD]
(1) Front gauge wheel
(2) Lift rod
(3) Front roller
(4) Anti-scalp roller
[2WD]
(1) Front gauge wheel
(2) Lift rod
(3) Front roller
(4) Anti-scalp roller
2. Grease the following parts. (See "MAINTENANCE
CHECK LIST" in "MAINTENANCE" section.)
A Universal joint
A Front gauge wheel brackets and front gauge
wheels
A Three spindle shafts
A Belt tension pivot and tension pulley
A Front roller
3. Remove the belt shield from the mower deck and
clean out debris daily.
4. When replacing the blades, follow the instructions as
shown below. (See "BLADE REPLACEMENT" in
"MAINTENANCE" section.)
IMPORTANT 1