Kubota RCK72P-F39 Operator's Manual page 55

16 MAINTENANCE
[RCK72P-F39]
For assisting the tilting up force.
A Detach the tilt pipe set in the mower deck, and attach
it to the tilt lever.
A Pull the tilt pipe in the direction of the arrow, hook the
tilt lever, and remove the tilt pipe.
To avoid personal injury:
A Securely insert the tilt lever in the tilt pipe.
A Never let go of the tilt pipe until the tilt lever is
locked to the hook securely.
Since the tilt lever is a spring loaded lever, the
pipe may bounce back.
(1) Tilt lever
(2) Tilt pipe
(3) Hook
5. Start the engine and raise the mower fully.
6. Lock the lift link lowering speed.
(For detailed procedure, refer to the machine
"OPERATOR'S MANUAL".)
7. Stop the engine and remove the key.
8. Pull out the lock pins (LH, RH) of the anti-scalp roller
and push them upward.
(A) "UNLOCKED"
(B) "LOCKED"
(1) Anti-scalp roller
(2) Lock pin
9. Pull out the lock pins (LH, RH) of the rear lift rod and
lock them in the open position.
(1) Mower link
(2) Lift rod
(3) Lock pin
10. Disengage the lock of the tilting pin, and pull up the
mower deck as shown in the figure.
(1) Tilting pin
(A) "Upward"