Table of Contents
Advertisement
Error
Message:
Not ready when reading drive A
Abort, Repeat, Ignore?_
Possible cause:
No or wrong diskette in drive A:
Corrective measure: Insert correct diskette and enter <R> for repeat or <A> for
abort.
Error
Message:
Transfer disturbed
Data loss in the P610-A350/A500-link
Possible cause:
See chapter 3.3 (Caution)
Corrective measure: See chapter 3.3 (Caution)
Error
Description:
User software cannot be executed
Possible cause:
Software is incorrectly installed or partially deleted
Corrective measure: Install software again
Error
Description:
No more data input possible
Possible cause:
System failure
Corrective measure: Warm restart
Error
Description:
No warm restart (with Ctrl+Alt+Del) possible
Possible cause:
System failure
Corrective measure: Press the reset key or
switch device off and on again
Error
Description:
One or more ports without function
Possible cause:
port(s) incorrectly configured
Corrective measure: Reconfigure (see chap. 10.2 in manufacturer's manual)
32
Errors and their Correction
22
Advertisement
Table of Contents
