Printer With Rs 232 C Port; Start Printout - AEG P610 Operating Instructions Manual

3.6.1.2

Printer with RS 232 C port

The P610 and the printer are connected with the YDL 36.1 cable and the YDL
44 adapter. The RS 232 C port (COM2) is used on the P610 for this purposes
(see also Figure 8).
3.6.2

Start Printout

A printout on the printer is offered using a selection menu or a request in various
areas of the software.
A hardcopy of the screen can be obtained by pressing the <Shift>+<PrtSc> keys
simultaneously.
If a printout is activated, the corresponding printer must be connected, switched
on and set on-line.
22
Programming Requirements 19