Prt/B/A Switch; Display Elements; Figure 3 Prt/B/A Switch; Figure 4 Display Elements - AEG P610 Operating Instructions Manual

2.1.1

PRT/B/A Switch

Figure 3 PRT/B/A Switch

This switch is used to configure the Centronics port. If no external diskette drive
is used or if a printer is connected, the switch must be set to position "PRT".
PRT: If no external diskette drive is used or if a
printer is connected
A: External diskette drive has the code "A"
B: External diskette drive has the code "B"
(These codes must also be set at the external diskette drive.)
2.1.2

Display Elements

Disk in Use
Power HDD FDD

Figure 4 Display Elements

Power: is lit: Power Supply exists
is not lit: Power supply missing
Disk in Use HDD: is lit: Hard disk being processed
21
Caps Num Scroll
Lock Lock Lock
Operation 7