3.1
Power Supply
The power supply of the P610 can be operated with 100 ... 240 VAC. The power
supply adapts automatically to the voltage.
3.2
Initial Start-up
Note Before the initial start-up as a programming panel, the user
should read especially chapters 2, 3 and 5 of the manufacturer's user
manual and then start operations.
Note If no external diskette drive is used, the PRT/B/A switch
should be set to "PRT" (see chap. 2.1.1).
3.3
Installation of the Software
Instructions for installing the software can be found in the relevant software
package.
Caution Do not start any memory-resident or interrupt-con-
trolled PC programs parallel to the AEG software (memory re-
quirement).
14
Programming Requirements
22